首页> 媒体中心> 华交会新闻

【快报】美国公布第四、五批对华关税加征排除清单

(www.ecf.org.cn)        更新: 2019-06-11

日前,美国公布第四批和第五批对华输美产品关税加征排除清单。此外,美国贸易代表办公室网站发布消息,510日前从中国出口,615日前运抵美国港口的中国输美商品将维持10%的税率,之前通知的最后期限是61日前到港。

美国贸易代表办公室(USTR2019514日批准515项针对美国对华301征税340亿清单的产品排除申请。此次排除涉及2110位美国税号,其中510位税号下的产品完全被排除,1610位税号下的35项特定产品被排除。此次排除具有溯及既往的效力,即追溯至201876日开始生效,已经缴纳的301税金可以要求返还。排除的效力将从该决定公告之日(514日)起开始计算,为期一年。

美国340亿美元关税加征清单第四批排除产品目录

全部排除税号

美国税号

具体排除产品(英文版)

具体排除产品(中文参考版)

8407.21.0040

全部排除税号

8427.10.4000

8473.40.1000

8481.10.0090

8483.50.9040

部分排除税号

美国税号

具体排除产品(英文版)

具体排除产品(中文参考版)

8421.21.0000

Apparatus, including pitchers, bottles, and units designed for incorporation into refrigerators, appliances or sink faucets, the foregoing fitted with filters for filtering or purifying water

用于安装在冰箱、电器或水槽水龙头上的装置,包括水罐、瓶子和部件,上述装置装有过滤器,用于过滤或净化水

8421.21.0000

Filtering apparatus, fitted with pumps, designed for use in pools, spas or similar contained bodies of water

过滤装置,配有泵,设计用于游泳池,水疗池或类似的水体

8421.21.0000

Filtering or purifying machinery or apparatus of a kind used for waste water treatment

用于废水处理的过滤或净化机械或装置

8421.21.0000

Submersible machinery for filtering water, designed for use in pools, basins, aquariums, spas or similar contained bodies of water

设计用于水池、水池、水族馆、水疗或类似含水体的过滤水的潜水机械

8421.21.0000

Water distillation machinery and apparatus not covered by heading 8419

8419品目未包括的水蒸馏机械和设备

8421.39.8015

Air purification equipment, electrically powered, weighing less than 36 kg

电动空气净化设备,重量36公斤以下

8421.39.8015

Dust collection equipment for cement, minerals and mining industries

水泥、矿产和采矿业用除尘设备

8428.39.0000

Apron-type chain conveyor

板式链式输送机

8428.39.0000

Roller conveyors

滚筒式输送机

8428.39.0000

Vibrating conveyors

振动输送机

8438.80.0000

Machinery for mixing beverages in single servings for direct human consumption, designed for use in commercial food service establishments

为商业食品服务机构设计的将饮料混合成单一份供人直接饮用的机器

8438.80.0000

Machinery for reconstituting single serving beverages for direct human consumption from frozen pre-packaged portions, designed for use in commercial food service establishments

用于直接人类消费的冷冻预包装部分重构单份饮料的机器,设计用于商业食品服务机构

8481.90.9040

Armatures designed for use in hydraulic solenoid valves

设计用于液压电磁阀的电枢

8481.90.9040

C-poles, of steel, designed for use in hydraulic solenoid control valves

C极钢制,设计用于液压电磁控制阀

8481.90.9040

Housings designed for hydraulic ball valves, of cast iron or steel, each measuring 5.7 cm by 3.2 cm and weighing 0.528 kg

设计用于液压球阀的外壳,铸铁或钢制,每个尺寸为5.7 cm×3.2 cm,重量为0.528 kg

8481.90.9040

Metering spools, of aluminum, designed for use in hydraulic solenoid control valves

铝制计量线轴,设计用于液压电磁控制阀

8481.90.9040

Metering spools, of steel, designed for use in hydraulic solenoid control valves

液压电磁控制阀用钢制计量线轴

8481.90.9040

Poles, of steel, designed for use in hydraulic solenoid control valves

设计用于液压电磁控制阀的钢制电杆

8481.90.9040

Push pins, of steel, designed for use in hydraulic solenoid control valves

液压电磁控制阀用钢制推杆

8481.90.9040

Retainers, of steel, designed for use in hydraulic solenoid control valves

液压电磁控制阀用钢制夹持器

8501.10.4060

DC electric motors, of an output of less than 18.65 W, valued over $4, other than brushless

直流电动机,输出功率小于18.65W,价值超过4美元,无刷者除外

8501.52.8040

AC electric motors, multi-phase, of an output exceeding 14.92 kW but not exceeding 75 kW, other than for use in civil aircraft

输出功率超过14.92千瓦但不超过75千瓦的多相交流电动机,民用航空器除外。

8505.90.7501

Coils, coil assemblies and other parts of electromagnets

电磁铁线圈、线圈组件和其他零件

8526.92.5000

Radio remote control apparatus for garage doors

用于车库门的无线电遥控装置

8526.92.5000

Radio remote control apparatus for pet collars and pet food dispensers

用于宠物项圈和宠物食品分配器的无线电遥控装置

8526.92.5000

Remote control devices, hand held and battery powered, designed for use with toy model vehicles and aircraft

遥控装置,手持式和电池供电,设计用于玩具模型车辆和飞机

8529.90.8100

Bezels, covers and housings, the foregoing designed for motor vehicle cameras

挡板,盖板和外壳,前述设计用于机动车辆摄像机

8536.49.0075

Electromechanical relays, for a voltage exceeding 60 V but not over 250 V, with contacts rated at 10 A or more

机电继电器,电压超过60V但不超过250V,触点额定值为10A或更高

8536.50.9035

Push-button switches, rated at over 5 A, measuring no more than 2.9 cm by 2.9 cm by 2.9 cm, with 4 spade or brass terminals, with an actuator shaft with D-shaped cross section

按钮开关,额定值超过5 A,尺寸不超过2.9厘米×2.9厘米×2.9厘米,带有4个铲形或黄铜端子,带有D形截面的执行器轴

8536.50.9035

Push-button switches, rated at over 5 A, measuring no more than 4.8 cm by 2.8 cm by 2.8 cm, with 2 spade or brass terminals

按钮开关,额定电流大于5 A,测量值不超过4.8 cm x 2.8 cm x 2.8 cm,带2个铁锹或黄铜端子

8536.50.9035

Push-button switches, rated at over 5 A, measuring no more than 5 cm by 1.7 cm by 1.9 cm, with 2 spade or brass terminals, with an actuator shaft with D-shaped cross section

按钮开关,额定值超过5 A,尺寸不超过5厘米×1.7厘米×1.9厘米,带有2个铲形或黄铜端子,带有D形截面的执行器轴

8536.50.9040

Snap-action switches, each designed for installation in a wall-mounted enclosure or electrical box

快动开关,每个都设计用于安装在壁挂式外壳或电气盒中

9011.10.8000

Stereoscopic microscopes, not provided with a means for photographing the image, valued not over $500 per unit

没有提供拍摄图像的装置的立体显微镜,每单位价值不超过500美元

9011.90.0000

Adapter rings, tubes and extension sleeves, stands and arm assemblies, stages and gliding tables, eyeguards and focusing racks, all the foregoing designed for use with compound optical microscopes

适配环,管和延伸套管,支架和臂组件,平台和滑动台,护目镜和聚焦架,所有前述设计用于复合光学显微镜

9018.20.0040

Ultraviolet or infrared LED light therapy devices for the professional treatment of pain or of ailments of the skin

紫外线或红外线LED光疗设备,用于专业治疗疼痛或皮肤疾病

 

 

 

美国贸易代表办公室(USTR2019530日批准464项针对美国对华301征税340亿清单的产品排除申请。此次排除涉及4410位美国税号,其中110位税号下的产品完全被排除,4310位税号下的88项特定产品被排除。此次排除具有溯及既往的效力,即追溯至201876日开始生效,已经缴纳的301税金可以要求返还。排除的效力将从本决定公告之日(530日)起开始计算,为期一年。

美国340亿美元关税加征清单第五批排除产品目录

全部排除税号

美国税号

具体排除产品(英文版)

具体排除产品(中文参考版)

8537.10.8000

全部排除税号

部分排除税号

美国税号

具体排除产品(英文版)

具体排除产品(中文参考版)

8411.99.9085

Parts of nonaircraft gas turbines, other   than rotors, spindles, rotor assemblies, spindle assemblies or steel forgings

非航空燃气轮机零件,但转子、主轴、转子组件、主轴组件或钢锻件除外

8413.50.0010

Oil well and oil field crank-balanced,   long-stroke and beam pumps

油井和油田曲柄平衡、长冲程和游梁泵

8413.50.0070

Radial piston hydraulic fluid pumps   weighing not over 500 grams

重量不超过500克的径向活塞液压泵

8413.70.2004

Centrifugal pumps, submersible, designed   for use in apparatus for supplying water to pets

潜水离心泵,设计用于向宠物供水的装置

8413.70.2004

Centrifugal pumps, submersible, other than   for use with machines for making cellulosic pulp, paper or paperboard; the   foregoing pumps rated not over 1.5 kW

潜水离心泵,不与纤维素纸浆、纸或纸板制造机一起使用;上述泵额定功率不超过1.5千瓦

8413.70.2004

Submersible dual port pump designed for use   in swimming pools

游泳池用潜水双口泵

8413.70.2004

Submersible pump designed for use in   aquariums, not over 325 mm tall

设计用于水族馆的潜水泵,高度不超过325mm

8413.70.2004

Submersible pump incorporating a magnetic   drive motor

带有磁力驱动电机的潜水泵

8413.70.2004

Submersible pumps, rated not over 1   horsepower, designed for use in pumping raw sewage

潜水泵,额定功率不超过1马力,设计用于抽取未经处理的污水

8413.70.2004

Sump pumps, submersible, rated not over 1   horsepower, activated by float switch

潜水集水坑泵,额定功率不超过1马力,由浮球开关启动

8413.70.2005

Centrifugal pumps, not for use with   machines for making cellulosic pulp, paper or paperboard, not submersible,   the foregoing single-stage, single-suction, close-coupled and with discharge   outlet under 5.1 cm in diameter

离心泵,不与用于制造纤维素纸浆、纸或纸板的机器一起使用,不可潜水,上述单级、单吸、紧密耦合和直径小于5.1 cm的排放口

8413.70.2090

Centrifugal pumps designed for eliminating   condensate, the foregoing not elsewhere specified or included

为消除冷凝水而设计的离心泵,上述未另行规定或包含

8413.91.9010

Housings for water pumps of subheading   8413.30.90

8413.30.90子目的水泵外壳

8413.91.9010

Impellers for water pumps of subheading   8413.30.90

8413.30.90子目的水泵叶轮

8413.91.9060

Hydraulic pump positioning piston   assemblies

液压泵定位活塞组件

8413.91.9060

Plastic reservoirs for motor vehicle brake   master cylinders

汽车制动总泵塑料储液罐

8414.90.4190

Airend assemblies, inlet guide vanes,   air-ends, compressor baseplates and backplates

空气轮组件、入口导叶、空气端、压缩机底板和背板

8418.69.0110

Stand-alone icemaking machines, each having   a rated capacity not exceeding 160 kg per day, capable of producing ice in   pieces not larger than 40 cubic cm in any dimension

独立制冰机,每台额定容量不超过每天160公斤,能以任何尺寸生产不超过40立方厘米的冰块。

8418.69.0180

Assemblies of thermo-electric modules,   whether or not presented with attached heat exchangers, fans, shrouds,   temperature sensors or controllers

热电模块组件,不论是否附有热交换器、风扇、覆环、温度传感器或控制器

8418.69.0180

Coolers, non-compressor, powered by 12 V   DC, each with an interior volume not exceeding 17 liters

非压缩机冷却器,由12伏直流电驱动,每台内部容积不超过17

8419.19.0040

Solar water heaters incorporating glass   tube heat collectors and including glass tubes and stands with tanks

包含玻璃管集热器的太阳能热水器,包括玻璃管和带水箱的支架

8419.40.0080

Distillation and rectifying equipment   designed for use in the production of methylene diphenyl diisocyanate

设计用于生产亚甲基二苯基二异氰酸酯的蒸馏和精馏设备

8419.90.3000

Heat exchanger plates, cores, finned tubes,   cones, shells, bonnets, flanges and baffles

换热器板、芯、鳍片管、锥、壳、阀盖、法兰和挡板

8421.99.0080

Cast steel and steel structural forms   designed for use in filtering machines, such machines used in mining or   manufacturing facilities

设计用于过滤机器的铸钢和钢结构模板,用于采矿或制造设施的此类机器

8421.99.0080

Parts of air filtering machines or   apparatus, the foregoing of cast steel and steel

空气过滤机器或设备的零件,上述铸钢和钢制

8427.10.8090

Self-propelled fork-lift and platform   trucks, each powered by an electric motor and controlled by walking operator

自行式叉车和平台式卡车,每辆由电动机驱动,由步行操作员控制

8428.90.0290

Garage door opener/closers

车库门开启器/关闭器

8428.90.0290

Hinged steel transfer machinery, designed   for diverting goods from and to conveyor lines

铰链式钢输送机械,设计用于将货物从输送线转移到输送线

8428.90.0290

Rotating bench, electrically powered,   designed for turning a workpiece in a production line

电动旋转工作台,设计用于在生产线上转动工件

8428.90.0290

Rotating fork machines, designed for   lifting and depositing coiled steel bars in a production line

旋转叉式机器,设计用于在生产线上提升和沉积盘条

8429.40.0020

Vibratory, self-propelled tamping machines,   each with drum roller

振动式自走式捣固机,每台均配有滚筒式压路机

8429.52.1010

New, track-mounted hydraulic backhoes or   hydraulic shovels, each with a 360-degree revolving superstructure

新型履带式液压反铲或液压铲,每台均配有360度旋转上部结构

8430.10.0000

Pile drivers, diesel powered

柴油打桩机

8431.39.0010

Belt conveyor crossmember assemblies

带式输送机横梁组件

8431.39.0010

Conveyor roller support brackets

输送辊支架

8431.39.0010

Carriers designed for holding motor   vehicles in overhead conveyors

设计用于将机动车辆固定在高架输送机中的运输车

8431.39.0010

Catenary idler stringers

悬链线托辊纵梁

8431.39.0010

Conveyor belt assemblies incorporating   bearings

带轴承的传送带组件

8431.39.0010

Conveyor line pans, the foregoing parts   suitable for use solely or principally with coal mine conveyors

输送机线路盘,上述部件适合单独使用或主要用于煤矿输送机

8431.39.0010

Conveyor spill plates

输送机溢油板

8431.39.0010

Welded frames designed to support conveyor   rollers

设计用于支撑输送辊的焊接框架

8431.49.9010

Feed pushers, bale forks, scrapers and   frames therefor

推料机、料捆叉、刮刀及其框架

8455.22.0000

Complete sheet pile rolling mills

全板桩轧机

8455.22.0000

Rolling mills designed to form 4 to 5   ribbed metal panels not exceeding 95 cm wide

设计成45个带肋金属板(宽度不超过95cm)的轧钢机

8482.10.5060

Double row ball bearings having an inner   diameter exceeding 15 mm but not exceeding 32 mm, an outer diameter exceeding   38 mm but not exceeding 64 mm and a width exceeding 15 mm but not exceeding   29 mm

双列滚珠轴承,内径超过15 mm但不超过32 mm,外径超过38 mm但不超过64 mm,宽度超过15 mm但不超过29 mm

8482.40.0000

Needle roller bearings of a width not   exceeding 30 mm

宽度不超过30毫米的滚针轴承

8482.99.0500

Outer bearing rings

外轴承环

8482.99.6595

Bearing shields

轴承护罩

8483.90.8010

Coupling covers, including center members,   flanged hubs, sleeves and shoes

联轴器盖,包括中心构件、法兰轮毂、套筒和支座

8501.53.8040

AC multi-phase motors, each of an output   exceeding 300 kW but not exceeding 310 kW, fitted with pulleys and brakes to   raise and lower passenger elevators

交流多相电动机,每相输出功率超过300千瓦,但不超过310千瓦,装有滑轮及制动器,用以升降客梯

8504.40.4000

Regenerative speed drive controllers for   controlling speed of electric motors for elevators

用于控制电梯电机速度的再生式速度驱动控制器

8504.40.4000

Variable frequency drive controllers for   electric motors, each weighing more than 1 kg but not more than 11 kg

电机变频驱动控制器,每台重量超过1 kg但不超过11 kg

8404.40.4000

Speed drive controllers for electric   motors, each such controller measuring 100 mm or more but not over 130 mm in   length, 40 mm or more but not over 125 mm in width and 24 mm or more but not   over 85 mm in height

电动机的速度驱动控制器,每个控制器的长度为100 mm或以上但不超过130 mm,宽度为40 mm或以上但不超过125 mm,高度为24 mm或以上但不超过85 mm

8504.40.0000

Speed drive controllers for electric   motors, the foregoing operating at 250 A or more but not over 500 A

电机的速度驱动控制器,上述控制器在250 A或以上但不超过500 A的条件下运行

8504.90.6500

Printed circuit assemblies of the goods of   subheading 8504.40 or 8504.50 for telecommunication apparatus, each measuring   4 cm to 6 cm in width and 10 cm to 12 cm in length, that converts 36 V DC to   90 V AC

电信设备用第8504.408504.50子目的货物的印刷电路组件,每个宽度为4 cm6 cm,长度为10 cm12 cm,可将36 V dc转换为90   V ac

8504.90.6500

Printed circuit assemblies of the goods of   subheading 8504.40 or 8504.50 for telecommunication apparatus, each measuring   7 cm to 9 cm in width and 18 cm to 20 cm in length, having 2 switches, for   power protection to prevent electrical back feeding

电信设备用第8504.408504.50子目的货物的印刷电路组件,每个组件的宽度为7 cm9 cm,长度为18 cm20 cm,具有2个开关,用于电源保护,以防止电反馈

8504.90.6500

Printed circuit assemblies of the goods of   subheading 8504.40 or 8504.50 for telecommunication apparatus, the foregoing   serving as controllers for power supplies, each measuring 5 cm to 7 cm in   width and 11 cm to 14 cm in length, having 50 pin on side header

用于电信设备的第8504.408504.50子目的货物的印刷电路组件,上述组件用作电源控制器,每个宽度为5 cm7 cm,长度为11 cm14   cm,侧标题上有50

8504.90.6500

Printed circuit assemblies of the goods of   subheading 8504.40 or 8504.50 for telecommunication apparatus, the foregoing   serving as noise filters, each measuring 18 cm to 20 cm in width and 25 cm to   27 cm in length, populated with semiconductor devices and 4 heat sinks

用于电信设备的第8504.408504.50子目的货物的印刷电路组件,上述组件用作噪声滤波器,每个宽度为18 cm20 cm,长度为25 cm27   cm,填充半导体器件和4个散热器

8525.60.1050

Radio transceivers operating on frequencies   from 46 MHz to 468 MHz, each designed for installation in motor vehicles

46兆赫至468兆赫频率范围内工作的无线电收发器,每个收发器设计用于安装在机动车辆上

8529.10.4040

Antennas, of base metal and fiberglass

天线,贱金属和玻璃纤维

8529.90.9900

Projector parts

投影仪零件

8536.41.0050

Electromechanical relays, for a voltage not   exceeding 24 V, other than automotive flashers, with contacts rated at 10 A   or more, measuring not over 80 mm in any dimension

机电式继电器,电压不超过24 V,除汽车闪光器外,触点额定值在10 A或以上,任何尺寸的测量值均不超过80 mm

8536.50.9035

Push-button switches, rated at over 5 A,   measuring no more than 14.4 cm by 11.6 cm by 6.4 cm

按钮开关,额定电流大于5 A,测量值不超过14.4 cm x 11.6 cm x 6.4 cm

8536.50.9035

Push-button switches, rated at over 5 A,   measuring no more than 14.6 cm by 8 cm by 14.1 cm

按钮开关,额定电流大于5 A,测量值不超过14.6 cm8 cm14.1   cm

8536.50.9035

Push-button switches, rated at over 5 A,   measuring no more than 19.1 cm by 8.3 cm by 14.1 cm

按钮开关,额定电流大于5 A,测量值不超过19.1 cm x 8.3 cm x 14.1 cm

8536.50.9035

Push-button switches, rated at over 5 A,   measuring no more than 19.7 cm by 11.8 cm by 8.3 cm

按钮开关,额定电流大于5 A,测量值不超过19.7 cm x 11.8 cm x 8.3 cm

8536.50.9035

Push-button switches, rated at over 5 A,   measuring no more than 19.7 cm by 9.8 cm by 16.5 cm

按钮开关,额定电流大于5 A,测量值不超过19.7 cm x 9.8 cm x 16.5 cm

8536.50.9035

Push-button switches, rated at over 5 A,   measuring no more than 21 cm by 13.3 cm by 9 cm

按钮开关,额定电流大于5 A,测量值不超过21 cm×13.3 cm×9 cm

8536.50.9035

Push-button switches, rated at over 5 A,   measuring no more than 23.5 cm by 8 cm by 13.1 cm

按钮开关,额定电流大于5 A,测量值不超过23.5 cm8 cm13.1   cm

8536.50.9035

Push-button switches, rated at over 5 A,   measuring no more than 6 cm by 14.1 cm by 11 cm

按钮开关,额定电流大于5 A,测量值不超过6 cm x 14.1 cm x 11 cm

8536.50.9065

Push-pull switches, for a voltage not   exceeding 1,000 V, designed for use in motor vehicles

电动车辆用电压不超过1000V的推拉开关

8536.90.4000

Bullet connectors, for a voltage not   exceeding 1,000 V

弹头连接器,电压不超过1000 V

8536.90.4000

Butt connectors, other than closed end, for   a voltage not exceeding 1,000 V

电压不超过1000V的非封闭端对接连接器

8536.90.4000

Closed-end butt connectors, for a voltage   not exceeding 1,000 V

封闭式对接接头,电压不超过1000 V

8536.90.4000

Crimp connectors, for a voltage not   exceeding 1,000 V

压接连接器,电压不超过1000 V

8536.90.4000

Insulated tab electrical connectors and tab   receptacle electrical connectors, for a voltage not exceeding 1,000 V,   crimp-type, with either a tab measuring not over 6.4 mm in width or a   receptacle for tabs measuring not over 6.4 mm in width

绝缘片电气连接器和接头插座电气连接器,电压不超过1000 V,压接型,带有宽度不超过6.4 mm的接头或用于测量宽度不超过6.4 mm的接头的插座

8536.90.4000

Junction blocks, for a voltage not   exceeding 1,000 V

接线盒,电压不超过1000 V

8536.90.4000

Lug connectors, for a voltage not exceeding   1,000 V

接线片连接器,电压不超过1000 V

8536.90.4000

Ring connectors, for a voltage not   exceeding 1,000 V

环式连接器,电压不超过1000 V

8536.90.4000

Spade connectors, for a voltage not   exceeding 1,000 V

扁平接头,电压不超过1000 V

8536.90.4000

Spring clip ("alligator clip")   terminals, for a voltage not exceeding 1,000 V

弹簧夹(“鳄鱼夹”)端子,电压不超过1000 V

8536.90.4000

Terminal blocks, for a voltage not   exceeding 1,000 V

电压不超过1000 V的接线板

8536.90.4000

Wire tap connectors, for a voltage not   exceeding 1,000 V

电压不超过1000伏的抽头连接器

8543.30.9040

Magnesium anodes, each not exceeding 48 kg   in weight

镁阳极,每块重量不超过48公斤

9018.19.9560

Disposable self-adhesive brain monitoring   sensor patches for use with an oximeter, each incorporating a circuit board,   light-emitting diode (LED), photo diodes and memory device and a connector

用于血氧计的一次性自粘脑监测传感器贴片,每个都包含电路板,发光二极管(LED),光电二极管和存储设备以及连接器

9018.19.9560

Disposable stainless steel subdermal needle   electrodes with accompanying harness for use with electromyography (EMG)   equipment

一次性不锈钢皮下针电极,附带线束,用于肌电图(EMG)设备

9018.19.9560

Disposable surface electrodes for   intra-operative neuromonitoring (IONM) systems, each composed of a surface   electrode pad, an insulated wire, and a standard DIN 42802 connector

用于术中神经监测(“IONM”)系统的一次性表面电极,每个系统由表面电极垫,绝缘线和标准DIN 42802连接器组成

9024.10.0000

Machines for testing the hardness of metals

用于测试金属硬度的机器

 

61日,美国贸易代表办公室(USTR)发布消息称,USTR将会在之后一周的联邦公报上发布一份通知,延长自中国出口的某些商品进入美国的时间至615日,随后,这些商品的关税才会从10%提高到25%

根据该公告,2019510日前从中国出口到美国的产品在进入美国后,仍然会被额外征收10%的关税,这些商品原定会在201961日被加征25%的关税,但是USTR将这最终时间延长至615日。USTR称,此次延期,是经进一步考虑海关执法因素,以及中国与美国之间的海上过境后做出的。